Description
Lambda T3 is a solid device that offers 18-20 consecutive uses, temperature adjustment, and automatic cleaning. Definitely a good device, but the price is a bit too high. Once you’ve unboxed your device you can check the charge. To do so just click on the control button once. The color of the light will correspond to battery charge. White means 100-30% charge remaining, yellow means 30-1% remaining, red means 0% remaining. Charging time for T3 is very convenient at only 1 hour and 15 minutes.
What’s Included
- 1 x LAMBDA T3 Device
- 1 x Cleaning Brush
- Cleaning Stick
- 1 x USB Cable
- 1 x User Manual
Specs & Features
- Heating Type: Titanium Steel Alloy Heating Blade
- Battery Capacity: 1500 mAh
- Charging Time: About 70 mins
- Input Voltage: 5V / 2A
- Smoking Time: 5.5 mins or 16 Puffs (14+2 Puffs)
- Product Size: 100.5*31*16.2 mm
- Weight: 69 g
- Material: Aluminum Alloy+PPSU+PEEK
- Compatible With: All Heets Sticks
- Temperature adjustment, automatic-cleaning.
- Tempered glass side panels
How To Use
- Set temperature
- press and hold the temperature control button
- the color of the temperature control button light indicates the set temperature
- white = low
- yellow = high
- Insert the HeatStick
- Press and hold control button to turn on
- Device will vibrate and light will begin flashing to show heating has started
- heating takes approximately 25 seconds
- Device will vibrate and light will turn solid when heating is done and device is ready to use
- cycle lasts 5.5 minutes or 16 puffs
- When cycle is over, device will vibrate and light turns off
- Remove Heat Stick by pushing cap up and pulling Heat Stick out
For good device health, make sure you clean you Lambda T3 device often. You can clean with the automatic-cleaning feature or manually. To use the automatic cleaning feature, click the control button 5 times. Automatic-cleaning will take approximately 30 seconds. To manually clean, wait until the device is cool then remove the cap from the body of the device and use either the cleaning brush or the cleaning sticks to wipe away any grime and build-up that is left in the Heat Sticks heating chamber.
